2888
Comment:
|
11530
|
Deletions are marked like this. | Additions are marked like this. |
Line 3: | Line 3: |
'''iomap''' grew out of need to provide '''modern''' block mapping abstraction for filesystems to read/write for three different IO access methods: | '''iomap''' allows filesystems to sequentially iterate over ranges in an inode and apply operations to it. |
Line 5: | Line 5: |
* Direct IO * Buffered IO * DAX |
'''iomap''' grew out of the need to provide a '''modern''' block mapping abstraction for filesystems with the different IO access methods they support '''and''' assisting the VFS with manipulating files into the page cache. '''iomap''' helpers are provided for each of these mechanisms. However, '''block mapping''' is just one of the features of '''iomap''', given '''iomap''' supports DAX devices and also supports such as the `lseek`/`llseek` `SEEK_DATA`/`SEEK_HOLE` interfaces. |
Line 9: | Line 7: |
Block mapping provides a mapping between data cached in memory, in the page cache, and the location on persistent storage where that data lives. [[https://lwn.net/Articles/930173/|LWN has an incredible review of the old buffer-heads block-mapping and why they are inefficient]], since the the inception of Linux. Since buffer-heads work on a 512-byte block based paradigm, it creates an overhead for modern storage media which no longer necessarily works only on 512-blocks. This document strives to provide a template for LSFMM for what will hopefully eventually become upstream Linux kernel documentation for '''iomap''' and guidance for developers on converting a filesystem over from buffer-heads to '''iomap'''. | Block mapping provides a mapping between data cached in memory and the location on persistent storage where that data lives. [[https://lwn.net/Articles/930173/|LWN has an incredible review of the old buffer-heads block-mapping and why they are inefficient]], since the the inception of Linux. Since '''buffer-heads''' work on a 512-byte block based paradigm, it creates an overhead for modern storage media which no longer necessarily works only on 512-blocks. '''iomap''' is flexible providing block ranges in '''bytes'''. '''iomap''', with the support of folios, provides a modern replacement for '''buffer-heads'''. This document strives to provide a template for LSFMM for what will hopefully eventually become upstream Linux kernel documentation for '''iomap''' and guidance for developers on converting a filesystem over from buffer-heads to '''iomap'''. |
Line 14: | Line 14: |
Instead of assuming a granularity of storage media 512-blocks at time, '''iomap''' allows filesystems to query storage media for data using block ranges. Since block mapping are provided for a block ranges for cache data in memory, in the page cache, naturally this implies operations on block ranges will also deal with multipage operations in the page cache. Folios are used to help provide multipage operations in memory. |
'''iomap''' allows filesystems to query storage media for data using '''byte ranges'''. Since block mapping are provided for a '''byte ranges''' for cache data in memory, in the page cache, naturally this implies operations on block ranges will also deal with '''multipage''' operations in the page cache. '''Folios''' are used to help provide '''multipage''' operations in memory for the '''byte ranges''' being worked on. |
Line 19: | Line 18: |
A filesystem is encouraged to provide struct iomap_ops for beginning an IO operation and ending an IO operation on a block range, and so the `struct iomap_ops` data structure has `iomap_begin()` and `iomap_end()` callbacks. Experience in adopting '''iomap''' on XFS has has shown that the filesystem implementation of these operations can be simplified considerably if one `struct iomap_ops` is provided per major filesystem IO operation. For example: | A filesystem is must provide a `struct iomap_ops` for to deal with the beginning an IO operation, `iomap_begin()`, and ending an IO operation on a block range, `iomap_end()`. You would call '''iomap''' with a specialized '''iomap''' operation depending on its filesystem or the VFS needs. |
Line 21: | Line 20: |
* `struct iomap_ops` xfs_'''xattr'''_iomap_ops - xfs: fix SEEK_DATA for speculative COW fork preallocation * `struct iomap_ops` xfs_'''seek'''_iomap_ops - iomap: move the iomap_dio_rw ->end_io callback into a structure * `struct iomap_dio_ops` xfs_'''dio_write'''_ops->end_io() - iomap: add a filesystem hook for direct I/O bio submission * `struct iomap_dio_ops` xfs_'''dio_write'''_ops->submit_io() - xfs: split the iomap ops for buffered vs direct writes * `struct iomap_ops` xfs_'''direct_write'''_iomap_ops * `struct iomap_ops` xfs_'''buffered_write'''_iomap_ops - xfs: split out a new set of read-only iomap ops * `struct iomap_ops xfs_'''read'''_iomap_ops` iomap: lift the xfs writeback code to iomap * `struct iomap_writeback_ops` xfs_'''writeback'''_ops - xfs: support CoW in fsdax mode * `struct iomap_ops` xfs_'''dax_write'''_iomap_ops |
For example iomap_dio_rw() would be used for for a filesystem when doing a block range read or write operation with direct IO. In this case your fileystems's respective `struct file_operations.write_iter()` would eventually call `iomap_dio_rw()` on the filesystem's `struct file_operations.write_iter()`. For buffered IO a fileseystem would use `iomap_file_buffered_write()` on the same `struct file_operations.write_iter()`. But that is not the only situation in which a filesystem would deal with buffered writes, you could also use buffered writes when a filesystem has to deal with `struct file_operations.fallocate()`. However `fallocate()` can be used for '''zeroing''' or for '''truncation''' purposes. A special respective `iomap_zero_range()` would be used for '''zeroing''', and a `iomap_truncate_page()` would be used for '''truncation'''. XFS was the first filesystem to adopt '''iomap''' and experience with it has shown that the filesystem implementation of these operations can be simplified considerably if one `struct iomap_ops` is provided per major filesystem IO operation: * buffered io * direct io * DAX io * fiemap for with extended attributes (`FIEMAP_FLAG_XATTR`) * lseek For example, XFS has: * `struct iomap_ops` xfs_'''read'''_iomap_ops` iomap * `struct iomap_ops` xfs_'''direct_write'''_iomap_ops * `struct iomap_ops` xfs_'''dax_write'''_iomap_ops * `struct iomap_ops` xfs_'''buffered_write'''_iomap_ops * `struct iomap_ops` xfs_'''xattr'''_iomap_ops * `struct iomap_ops` xfs_'''seek'''_iomap_ops == struct iomap_dio_ops == Used for direct-IO. These will call `iomap_dio_write()`. * `struct iomap_dio_ops.end_io()` * `struct iomap_dio_ops.submit_io()` == struct iomap_writeback_ops == The `struct iomap_writeback_ops` is used for when dealing with a filesystem `struct address_space_operations.writepages()`, for writeback. * `struct iomap_writeback_ops` == Calling iomap == You call '''iomap''' depending on the type of filesystem operation you are working on. We detail some of these interactions below. === Calling iomap for bufferred IO writes === You call '''iomap''' for buffered IO with: * `iomap_file_buffered_write()` - for buffered writes * `iomap_page_mkwrite()` - when dealing callbacks for `struct vm_operations_struct`: * `struct vm_operations_struct.page_mkwrite()` * `struct vm_operations_struct.fault()` * `struct vm_operations_struct.huge_fault()` * `struct vm_operations_struct`.pfn_mkwrite()` You '''may''' use buffered writes to also deal with `fallocate()`: * `iomap_zero_range()` on fallocate for zeroing * `iomap_truncate_page()` on fallocate for truncation Typically you'd also happen to use these on paths when updating an inode's size. === Calling iomap for direct IO === You call '''iomap''' for direct IO with: * `iomap_dio_rw()` You '''may''' use direct IO writes to also deal with `fallocate()`: * `iomap_zero_range()` on fallocate for zeroing * `iomap_truncate_page()` on fallocate for truncation Typically you'd also happen to use these on paths when updating an inode's size. === Calling iomap for reads === You can call into '''iomap''' for reading, ie, dealing with the filesystems's `struct file_operations`: * `struct file_operations.read_iter()`: note that depending on the type of read your filesystem might use `iomap_dio_rw()` for direct IO, generic_file_read_iter() for buffered IO and `dax_iomap_rw()` for DAX. * `struct file_operations.remap_file_range()` - currently the special `dax_remap_file_range_prep()` helper is provided for DAX mode reads. === Calling iomap for userspace file extent mapping === The `fiemap` ioctl can be used to allow userspace to get a file extent mapping, instead of older `bmap()` allows the VM to map logical block offset to physical block number. The `bmap()` is a legacy block mapping operation supported only for the ioctl and two areas in the kernel which likely are broken (the default swapfile implementation and odd md bitmap code). The `fiemap` ioctl is supported through an inode `struct inode_operations.fiemap()` callback. You would use `iomap_fiemap()` to provide the mapping. You could use two seperate `struct iomap_ops` one for when requested to also map extended attributes (`FIEMAP_FLAG_XATTR`) and your another `struct iomap_ops` for regular read `struct iomap_ops` when there is no need for extended attributes. In the future '''iomap''' may provide its own dedicated ops structure for '''fiemap'''. === Calling iomap for assisting the VFS === A filesystem also needs to call '''iomap''' when assisting the VFS manipulating a file into the page cache. ==== Calling iomap for VFS reading ==== A filesystem can call '''iomap''' to deal with the VFS reading a file into folios with: * `iomap_bmap()` - called to assist the VFS when manipulating page cache with `struct address_space_operations.bmap()`, to help the VFS map a logical block offset to physical block number. * `iomap_read_folio()` - called to assist the page cache with `struct address_space_operations.read_folio()` * `iomap_readahead()` - called to assist the page cache with `struct address_space_operations.readahead()` ==== Calling iomap for VFS writepages ==== A filesystem can call '''iomap''' to deal with the VFS write out of pages back to backing store, that is to help deal with a filesystems's `struct address_space_operations.writepages()`. The special `iomap_writepages()` is used for this case with its own respective filestems's `struct iomap_ops` for this. ==== Calling iomap for VFS llseek ==== A filesystem `struct address_space_operations.llseek()` is used by the VFS when it needs to move the current file offset, the file offset is in `struct file.f_pos`. '''iomap''' has special support for the `llseek` `SEEK_HOLE` or `SEEK_DATA` interfaces: * `iomap_seek_hole()`: for when the `struct address_space_operations.llseek()` ''whence'' argument is `SEEK_HOLE`, when looking for the file's next hole. * `iomap_seek_data()`: for when the `struct address_space_operations.llseek()` ''whence'' argument is `SEEK_DATA` when looking for the file's next data area. Your own 'struct iomap_ops` for this is encouraged. === Calling iomap for DAX === You can use `dax_iomap_rw()` when calling iomap from a DAX context, this is typically from the filesystems's `struct file_operations.write_iter()` callback. |
Line 32: | Line 122: |
== Defining a simple filesystem == | These are generic guidelines on converting a filesystem over to '''iomap''' from '''buffer-heads'''. |
Line 34: | Line 124: |
The easiest | === One op at at time === You may try to convert a filesystem with different clustered set of operations at time, below are a generic order you may strive to target: * direct io * misc helpers (seek/fiemap/bmap) * buffered io === Defining a simple filesystem === A simple filesystem is perhaps the easiest to convert over to '''iomap''', a simple filesystem is one which: * does not use fsverify, fscrypt, compression * has no Copy on Write support (reflinks) ==== Converting a simple filesystem to iomap ==== Simple filesystems should covert to IOMAP directly and avoid buffer heads directly, ie, don't use `IOMAP_F_BUFFER_HEAD`. === Converting shared filesystem features === fscrupt, fsverity, compression needs to be converted first to '''iomap''' if a fs uses it as '''iomap''' supports no permutations (XXX: clarify on this) === Converting complex filesystems === If your filesystem does not fit the simple description above the general recommendation is to port to '''iomap''' with `IOMAP_F_BUFFER_HEAD` in one kernel release to verify you no bugs with, locking, writeback and general use of your new `struct iomap_ops`. === When to set iomap on srcmap or dstmap === The struct iomap is required to be set on `iomap_begin()`, if its a '''CoW''' path also set `srcmap` when used with iomap_begin(). This perhaps should be redesigned in the future depending on read / write requirements and it may take time to get this right. === Removal of IOMAP_F_BUFFER_HEAD === `IOMAP_F_BUFFER_HEAD` won't be removed until we have all filesystem fully converted away from '''buffer-heads''', and this could be never. === Testing Direct IO === Other than fstests you can use LTP's dio, however this tests is limited as it does not test stale data. {{{ ./runltp -f dio -d /mnt1/scratch/tmp/ }}} === Known issues and future improvements === Other than lack of documetnation there are some known issues and limitatiosn with '''iomap''' at this time. We try to itemize them here: * write amplification on IOMAP when bs < ps * '''iomap''' needs improvements for large folios for dirty bitmap tracking === Q&A === * Why does btrfs only have a few IOMAP calls: * btrfs manages page cache folios for buffered IO? === References === * [[https://docs.google.com/presentation/d/e/2PACX-1vSN4TmhiTu1c6HNv6_gJZFqbFZpbF7GkABllSwJw5iLnSYKkkO-etQJ3AySYEbgJA/pub?start=true&loop=false&delayms=3000&slide=id.g189cfd05063_0_185|Presentation on iomap evolution]] * [[https://lwn.net/Articles/930173/|LWN review of deprecating buffer-heads]]] ---- CategoryDocs |
iomap
iomap allows filesystems to sequentially iterate over ranges in an inode and apply operations to it.
iomap grew out of the need to provide a modern block mapping abstraction for filesystems with the different IO access methods they support and assisting the VFS with manipulating files into the page cache. iomap helpers are provided for each of these mechanisms. However, block mapping is just one of the features of iomap, given iomap supports DAX devices and also supports such as the lseek/llseek SEEK_DATA/SEEK_HOLE interfaces.
Block mapping provides a mapping between data cached in memory and the location on persistent storage where that data lives. LWN has an incredible review of the old buffer-heads block-mapping and why they are inefficient, since the the inception of Linux. Since buffer-heads work on a 512-byte block based paradigm, it creates an overhead for modern storage media which no longer necessarily works only on 512-blocks. iomap is flexible providing block ranges in bytes. iomap, with the support of folios, provides a modern replacement for buffer-heads.
This document strives to provide a template for LSFMM for what will hopefully eventually become upstream Linux kernel documentation for iomap and guidance for developers on converting a filesystem over from buffer-heads to iomap.
Contents
A modern block abstraction
iomap allows filesystems to query storage media for data using byte ranges. Since block mapping are provided for a byte ranges for cache data in memory, in the page cache, naturally this implies operations on block ranges will also deal with multipage operations in the page cache. Folios are used to help provide multipage operations in memory for the byte ranges being worked on.
struct iomap_ops
A filesystem is must provide a struct iomap_ops for to deal with the beginning an IO operation, iomap_begin(), and ending an IO operation on a block range, iomap_end(). You would call iomap with a specialized iomap operation depending on its filesystem or the VFS needs.
For example iomap_dio_rw() would be used for for a filesystem when doing a block range read or write operation with direct IO. In this case your fileystems's respective struct file_operations.write_iter() would eventually call iomap_dio_rw() on the filesystem's struct file_operations.write_iter().
For buffered IO a fileseystem would use iomap_file_buffered_write() on the same struct file_operations.write_iter(). But that is not the only situation in which a filesystem would deal with buffered writes, you could also use buffered writes when a filesystem has to deal with struct file_operations.fallocate(). However fallocate() can be used for zeroing or for truncation purposes. A special respective iomap_zero_range() would be used for zeroing, and a iomap_truncate_page() would be used for truncation.
XFS was the first filesystem to adopt iomap and experience with it has shown that the filesystem implementation of these operations can be simplified considerably if one struct iomap_ops is provided per major filesystem IO operation:
- buffered io
- direct io
- DAX io
fiemap for with extended attributes (FIEMAP_FLAG_XATTR)
- lseek
For example, XFS has:
struct iomap_ops xfs_read_iomap_ops` iomap
struct iomap_ops xfs_direct_write_iomap_ops
struct iomap_ops xfs_dax_write_iomap_ops
struct iomap_ops xfs_buffered_write_iomap_ops
struct iomap_ops xfs_xattr_iomap_ops
struct iomap_ops xfs_seek_iomap_ops
struct iomap_dio_ops
Used for direct-IO. These will call iomap_dio_write().
struct iomap_dio_ops.end_io()
struct iomap_dio_ops.submit_io()
struct iomap_writeback_ops
The struct iomap_writeback_ops is used for when dealing with a filesystem struct address_space_operations.writepages(), for writeback.
struct iomap_writeback_ops
Calling iomap
You call iomap depending on the type of filesystem operation you are working on. We detail some of these interactions below.
Calling iomap for bufferred IO writes
You call iomap for buffered IO with:
iomap_file_buffered_write() - for buffered writes
iomap_page_mkwrite() - when dealing callbacks for struct vm_operations_struct:
struct vm_operations_struct.page_mkwrite()
struct vm_operations_struct.fault()
struct vm_operations_struct.huge_fault()
struct vm_operations_struct.pfn_mkwrite()`
You may use buffered writes to also deal with fallocate():
iomap_zero_range() on fallocate for zeroing
iomap_truncate_page() on fallocate for truncation
Typically you'd also happen to use these on paths when updating an inode's size.
Calling iomap for direct IO
You call iomap for direct IO with:
iomap_dio_rw()
You may use direct IO writes to also deal with fallocate():
iomap_zero_range() on fallocate for zeroing
iomap_truncate_page() on fallocate for truncation
Typically you'd also happen to use these on paths when updating an inode's size.
Calling iomap for reads
You can call into iomap for reading, ie, dealing with the filesystems's struct file_operations:
struct file_operations.read_iter(): note that depending on the type of read your filesystem might use iomap_dio_rw() for direct IO, generic_file_read_iter() for buffered IO and dax_iomap_rw() for DAX.
struct file_operations.remap_file_range() - currently the special dax_remap_file_range_prep() helper is provided for DAX mode reads.
Calling iomap for userspace file extent mapping
The fiemap ioctl can be used to allow userspace to get a file extent mapping, instead of older bmap() allows the VM to map logical block offset to physical block number. The bmap() is a legacy block mapping operation supported only for the ioctl and two areas in the kernel which likely are broken (the default swapfile implementation and odd md bitmap code). The fiemap ioctl is supported through an inode struct inode_operations.fiemap() callback.
You would use iomap_fiemap() to provide the mapping. You could use two seperate struct iomap_ops one for when requested to also map extended attributes (FIEMAP_FLAG_XATTR) and your another struct iomap_ops for regular read struct iomap_ops when there is no need for extended attributes. In the future iomap may provide its own dedicated ops structure for fiemap.
Calling iomap for assisting the VFS
A filesystem also needs to call iomap when assisting the VFS manipulating a file into the page cache.
Calling iomap for VFS reading
A filesystem can call iomap to deal with the VFS reading a file into folios with:
iomap_bmap() - called to assist the VFS when manipulating page cache with struct address_space_operations.bmap(), to help the VFS map a logical block offset to physical block number.
iomap_read_folio() - called to assist the page cache with struct address_space_operations.read_folio()
iomap_readahead() - called to assist the page cache with struct address_space_operations.readahead()
Calling iomap for VFS writepages
A filesystem can call iomap to deal with the VFS write out of pages back to backing store, that is to help deal with a filesystems's struct address_space_operations.writepages(). The special iomap_writepages() is used for this case with its own respective filestems's struct iomap_ops for this.
Calling iomap for VFS llseek
A filesystem struct address_space_operations.llseek() is used by the VFS when it needs to move the current file offset, the file offset is in struct file.f_pos. iomap has special support for the llseek SEEK_HOLE or SEEK_DATA interfaces:
iomap_seek_hole(): for when the struct address_space_operations.llseek() whence argument is SEEK_HOLE, when looking for the file's next hole.
iomap_seek_data(): for when the struct address_space_operations.llseek() whence argument is SEEK_DATA when looking for the file's next data area.
Your own 'struct iomap_ops` for this is encouraged.
Calling iomap for DAX
You can use dax_iomap_rw() when calling iomap from a DAX context, this is typically from the filesystems's struct file_operations.write_iter() callback.
Converting filesystems from buffer-head to iomap guide
These are generic guidelines on converting a filesystem over to iomap from buffer-heads.
One op at at time
You may try to convert a filesystem with different clustered set of operations at time, below are a generic order you may strive to target:
- direct io
- misc helpers (seek/fiemap/bmap)
- buffered io
Defining a simple filesystem
A simple filesystem is perhaps the easiest to convert over to iomap, a simple filesystem is one which:
- does not use fsverify, fscrypt, compression
- has no Copy on Write support (reflinks)
Converting a simple filesystem to iomap
Simple filesystems should covert to IOMAP directly and avoid buffer heads directly, ie, don't use IOMAP_F_BUFFER_HEAD.
Converting shared filesystem features
fscrupt, fsverity, compression needs to be converted first to iomap if a fs uses it as iomap supports no permutations (XXX: clarify on this)
Converting complex filesystems
If your filesystem does not fit the simple description above the general recommendation is to port to iomap with IOMAP_F_BUFFER_HEAD in one kernel release to verify you no bugs with, locking, writeback and general use of your new struct iomap_ops.
When to set iomap on srcmap or dstmap
The struct iomap is required to be set on iomap_begin(), if its a CoW path also set srcmap when used with iomap_begin().
This perhaps should be redesigned in the future depending on read / write requirements and it may take time to get this right.
Removal of IOMAP_F_BUFFER_HEAD
IOMAP_F_BUFFER_HEAD won't be removed until we have all filesystem fully converted away from buffer-heads, and this could be never.
Testing Direct IO
Other than fstests you can use LTP's dio, however this tests is limited as it does not test stale data.
./runltp -f dio -d /mnt1/scratch/tmp/
Known issues and future improvements
Other than lack of documetnation there are some known issues and limitatiosn with iomap at this time. We try to itemize them here:
write amplification on IOMAP when bs < ps
iomap needs improvements for large folios for dirty bitmap tracking
Q&A
- Why does btrfs only have a few IOMAP calls:
- btrfs manages page cache folios for buffered IO?