Welcome to IIO tasks page
This page is dedicated to students applying for GSoC/Outreachy programs.
It also aims to help newcomers getting started with the Industrial IO subsystem, offering pointers to documentation and small tasks.
For GSoC/Outreachy students:
Please use a single email thread for communication. During the application always reply to this thread if you have a question or sending the solution for a task. The email should have the following format:
subject: GSoC IIO project: Your Name
body: <short description of content: e.g Task 01 / Question about the schedule / etc> <the actual email body>
Experimenting with IIO subsystem
For this we will use two kernel modules found in drivers/iio/dummy:
iio_dummy.ko - example IIO driver to demonstrate existing functionality
core implementation can be found in iio_simple_dummy.c
buffer functionality is implemented in iio_simple_dummy_buffer.c
events functionality is implemented in iio_simple_dummy_events.c
iio_dummy_evgen.ko - generates fake events interrupts to be used by the iio_dummy example driver
implementation for this module is in iio_dummy_evgen.c
Dummy modules compilation
You need to select the following config options:
CONFIG_IIO_CONFIGFS - for creating the dummy device under configfs
CONFIG_IIO_SIMPLE_DUMMY - for building iio_dummy kernel module
CONFIG_IIO_SIMPLE_DUMMY_EVENTS, CONFIG_IIO_SIMPLE_DUMMY_BUFFER should be selected for events and buffer functionality.
CONFIG_IIO_DUMMY_EVGEN - for building iio_dummy_evgen kernel module
- Mount the configfs filesystem: read Documentation/iio/iio_configfs.txt
Use the following commands for modules compilation:
$ make drivers/iio/dummy/iio_dummy_evgen.ko
$ make drivers/iio/dummy/iio_dummy.ko
Use the following commands for module loading:
$ insmod iio_dummy_evgen.ko
$ insmod iio_dummy.ko
Use the following command to create your dummy device under the configfs filesystem:
$ mkdir /config/iio/devices/dummy/my_dummy_device
- Show that config options for IIO dummy modules were correctly selected
- send the content of the following command grep IIO .config
- Show that the modules were successfully loaded.
- lsmod | grep dummy
- ls -l /config/iio/devices/dummy/
- ls -l /sys/bus/iio/devices/iio:device0/
- ls -l /sys/bus/iio/devices/iio_evgen/
- Add channels for a 3-axis compass to iio_simple_dummy module.
- Show that channels were successfully added
- ls -l /sys/bus/iio/devices/iio:device0/
- ls -l /sys/bus/iio/devices/iio:device0/scan_elements
- create a patch with your changes
- channel type for a compass is IIO_MAGN
- users should be able to read raw readings from each axis
- users should be able to read a shared scale
- users should be able to access data via a buffer
- data is unsigned, resolution is 16 bits, storage is 16 bits
- compass doesn't support events
IIO event monitor
IIO event monitor is an user space example application which reads events from IIO layer and pretty prints the results. Implementation can be found in iio_event_monitor.c under tools/iio/.
compile iio_event_monitor.c to obtain an executable called iio_event_monitor.
- send us the command(s) used to successfully compile iio_event_monitor.c
Read events using iio_event_monitor
- run iio_event_monitor without arguments to figure out how it should be used
- read events from iio_dummy module
- Events are generated by iio_dummy_evgen via sysfs (look inside /sys/bus/iio/devices/iio_evgen/)
- send us the commands used to read/generate the events
Create triggers using configfs interface.
- read Documentation/iio/iio_configfs.txt in order to create an hrtimer software trigger named t1.
- where in the sysfs hierarchy does the trigger resides?
- sends us the commands used to create the trigger
Read samples from buffer generated by the iio_dummy module.
- compile iio_generic_buffer.c from tools/iio. This program will be used to read data from buffer.
have a look at ./iio_generic_buffer -h options. You will use the trigger t1 created with the previous tasks and iio_dummy_part_no for IIO device.
- send us the full command history
Note for all IIO Coding Tasks:
- Please use the task page to claim the driver you are going to patch.
Please 'CC firstname.lastname@example.org on all questions related to this so everyone can benefit.
Coding Task 1:
For question please send questions in the format mentioned above to daniel.baluta at nxp dot com or the #linux-iio IRC channel (server irc.oftc.net).