These instructions assume you're running a variant of Debian, Ubuntu (e.g. 18.04 LTS), ArchLinux or Manjaro. If you’re not familiar with using Linux, then probably you should check out the Linux Foundation’s course on Introduction to Linux on Edx.
Packages
To install all required packages on Ubuntu/Debian, run this command:
sudo apt-get install vim libncurses-dev gcc make git exuberant-ctags libssl-dev bison flex libelf-dev bc
To install all required packages on ArchLinux/Manjaro, run this command:
sudo pacman -S vim ncurses gcc make git ctags openssl bison flex libelf bc
You’ll be extensively using the following utilities while working on the Linux kernel.
Editors
vim
Programmer's editor - Vim is a highly configurable text editor built to enable efficient text editing. It is an improved version of the vi editor distributed with most UNIX systems
geany
If you feel more comfortable with a graphical editor, that can be easily configured to help adhering with the Linux kernel coding style, you can also consider geany. Packages are available for most distributions.
Build
gcc
The GNU Compiler Collection (GCC) is a compiler system produced by the GNU Project supporting various programming languages.GCC is the standard compiler for most Unix-like operating systems.
make
The make utility automatically determines which pieces of a large program need to be recompiled, and issues commands to recompile them. To prepare to use make, you must have a file called the makefile that describes the relationships among files in your program and provides commands for updating each file. Once a suitable makefile exists (which is the case for the Linux kernel), each time you change some source files, the simple shell command:
make
suffices to perform all necessary recompilations.
ncurses
ncurses (new curses) is a programming library providing an application programming interface (API) that allows the programmer to write text-based user interfaces in a terminal-independent manner. It is a toolkit for developing "GUI-like" application software that runs under a terminal emulator.
libssl
This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. Module signing and external certificate handling use the OpenSSL program and crypto library to do key creation and signature generation.
bison
Bison is a general-purpose parser generator that converts an annotated context-free grammar into a deterministic LR or generalized LR (GLR) parser employing LALR(1) parser tables. Since Linux 4.16, the build system generates parsers during build. This requires bison 2.0 or later.
flex
Flex is a fast lexical analyser generator. It is a tool for generating programs that perform pattern-matching on text. Flex is a free (but non-GNU) implementation of the original Unix lex program. Since Linux 4.16, the build system generates lexical analyzers during build. This requires flex 2.5.35 or later.
libelf
The Executable and Linkable Format (ELF, formerly named Extensible Linking Format), is a common standard file format for executable files, object code, shared libraries, and core dumps. 'Libelf' lets you read, modify or create ELF files in an architecture-independent way. The library takes care of size and endian issues. The Linux kernel and kernel modules use ELF specifications. Hence you’ll need this dependency.
bc
bc is an arbitrary precision numeric processing language. It supports interactive execution of statements. bc is used during the kernel build to generate time constants in header files.
RCS
git
Git is a version-control system for tracking changes in computer files and coordinating work on those files among multiple people.
Apart from that, the following packages are necessary for the Linux kernel build process, but one does not have to interact with them directly.
Repository
Once that finishes, run these two commands:
mkdir -p git/kernels; cd git/kernels
Then use the revision control system called git to clone Greg Kroah-Hartman's staging tree repository:
git clone -b staging-testing git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
That's going to take a while. Why don't you read up on Linux Device Drivers in the meantime? The first couple of chapters, especially the ones on kernel modules, will be useful. (Note that LDD3 is a bit outdated; the high-level overviews still make sense, but a few of the code examples are out of date. Still recommended to get a view of the kernel landscape, though.)
Next, change into the staging directory:
cd staging
Now you need to compile the kernel. The first step is setting up your kernel configuration.
Configuration
Many kernel drivers can be turned on or off, or built as modules. The .config file in the kernel source directory determines which drivers are built. When you download the source tree, it doesn't come with a .config file. You have several options on generating a .config file. The easiest is to duplicate your current config.
Initial
If you're trying to see if a bug is fixed, you probably want to duplicate the configuration on your running kernel. That config file is stored somewhere in /boot/. There might be several files that start with config, so you want the one associated with your running kernel. You can find that by running uname -a and finding the config file that ends with your kernel version number. Copy that file into the source directory as .config. Or for Ubuntu just run this command:
cp /boot/config-`uname -r`* .config
For ArchLinux/Manjaro,
zcat /proc/config.gz > .config
Do not forget to rename your kernel version "CONFIG_LOCALVERSION" in the new .config. If you skip this, there is the risk of overwriting one of your existing kernels by mistake.
Make changes
If you need to make any changes to your configuration, run this command to silently update any new configuration values to their default:
make olddefconfig
If you need to make changes, you can run:
make menuconfig
This requires the ncurses library to be installed.
If you want to compile faster, you can remove from the configuration all the modules you are not using at the moment in your system with:
make localmodconfig
Warning: this might not compile some required modules to your system when building the kernel.
Build
Run
make
Or, if you have a multi-core processor, run
make -jX
Where X is a number like 2 or 4. If you have a dual core, 2 or 3 might be good. Quad core, 4 or 6. Do not run with really big numbers unless you want your machine to be dog-slow!
Let that compile, and maybe read some more of the Linux Device Drivers book.
Note: when you run make with a .config file that was copied from a different kernel than the one you were building, you may be prompted to make choices about which new kernel features to enable. When in doubt, just choose the default choice. You can do that by hitting enter. A faster way to simply chose all the defaults is to run make menuconfig. This will set default values for unset features. Don't forget to save when you exit.
Install
To install a kernel, you will need to either manually update your GRUB configuration file, or have an installkernel script. This script installs the kernel to /boot/, installs modules to /lib/modules/X.Y.Z/ (where X.Y.Z is something like 3.1.5), and updates file /boot/grub/grub.conf. Fortunately, Ubuntu provides an installkernel script in /sbin/installkernel. The grubby RPM provides it for RPM based systems.
If you have an installkernel script, you can just run
sudo make modules_install install
Or if you don't have sudo installed, run
su -c "make modules_install install"
For ArchLinux/Manjaro you’ll need to do a few more things as mentioned here. Make sure that after completion of all the steps you have
1. Kernel: vmlinuz-YourKernelName
2. Initramfs: Initramfs-YourKernelName.img
3. System Map: System.map-YourKernelName
4. System Map kernel symlink
Running your kernel
Linux stores both old and new kernel versions, so you can boot into your old kernel if you run into issues with your new kernel. The bootloader program called grub lets you chose which kernel you want to boot into.
The grub bootloader usually presents the user with a choice of kernels and you can reboot into a known good kernel if your newly compiled kernel doesn't work. Some distros (like Ubuntu) use a default grub configuration that hides that menu. You can usually get the menu to appear by mashing the ESC key during boot after the BIOS display disappears.
To make the grub boot menu always appear under Ubuntu, run
sudo vim /etc/default/grub
(If you have the following lines in your grub file, you'll need to delete them)
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
This next line controls how long grub shows the menu before it chooses the kernel at the top of the list (which is usually the most recent kernel):
GRUB_TIMEOUT=10
You may want to increase the GRUB_DEFAULT timeout from 10 seconds to 30 seconds or more. I set it to 60 seconds.
Also, check that
GRUB_TIMEOUT_STYLE=menu
After you've finished editing the grub file, you need to tell grub that you made a change, so that can re-write some automatically generated files. Run this command:
sudo update-grub2
You will (usually) need to reboot into your new kernel.
Email software
The following instructions assume that you are running a variant of Ubuntu (like 18.04 LTS). If you use any other distribution, perform the steps with your distro specific package manager (e.g. For ArchLinux/Manjaro, replace apt-get install packagename with pacman -S packagename )
To send patches, you will need to be able to have a mail transport client installed:
sudo apt-get install esmtp msmtp
Now you will be able to send email through git-send-email. However, we also recommend having a mail client installed that can handle plain text patch format. Our recommendation is a text-based email client called mutt:
sudo apt-get install mutt
You may want to send patches with the git send-email command, so you need to install the git-email package:
sudo apt-get install git-email
Optional tools
sudo apt-get install gitk
gitk is a graphical git repository browser. You can use it to look at the state of your repository and the commits you've made on top of upstream. Just type gitk from within your kernel source directory.
Make ctags
ctags parses source code and produces a sort of index mapping the names of significant entities (e.g. functions, classes, variables) to the location where that entity is defined. This index is used by editors like vi and emacsen to allow moving to the definition of a user-specified entity. Exuberant Ctags supports all possible C language constructions and multiple other languages.
You’ve already installed it along with other packages in the first step.
In the git/kernels/staging/ directory, run
make tags
That will make ctags for the source code. When you start editing code in vim from the base directory (git/kernels/staging/), you can use the CTRL+] to look up the definition of a function. See the ctags entry in the vim tips wiki for more info.
Done!
Yay, you're done setting up your kernel development environment! Now go start at these directions to get more instructions for how to modify the Linux kernel and send your first patch.