Revision 1 as of 2004-12-20 03:31:33
import from old wiki
converted to 1.6 markup
|No differences found!|
Please do not edit this list for now. Email changes to me if you like. Nick Piggin <firstname.lastname@example.org>
last updated from 2.6.0-test11-mm1
- PRI1: We're totally lame if this doesn't get in
- PRI2: Would be nice
- PRI3: Not very important
-- Not-ready features and speedups --
- viro: paride drivers need a big cleanup. Partially done, but ATAPI drivers
- need serious work and bug fixing. PRI2
- rmk, trini: add support for alarms to the existing generic rtc driver.
(Pavel Machek <email@example.com>)
- There are few must-fix bugs in cursor handling.
- Play with gpm selection for a while and your cursor gets corrupted with
- random dots. Ouch.
- ioctl interface cleanup patch is ready (redo the structure layouts)
- A port of the 2.4 snapshot and mirror targets is in progress
- the fs interface to dm needs to be redone. gregkh was going to work on
- this. viro is interested in seeing work thus-far. PRI2
(Jean Tourrilhes <firstname.lastname@example.org>)
- get latest orinoco changes from David.
- get the latest airo.c fixes from CVS. This will hopefully fix problems
- people have reported on the LKML. PRI1
- get HostAP driver in the kernel. No consolidation of the 802.11
- management across driver can happen until this one is in (which is probably 2.7.X material). I think Jouni is mostly ready but didn't find time for it. PRI2
- get more wireless drivers into the kernel. The most "integrable" drivers
- at this point seem the NWN driver, Pavel's Spectrum driver and the Atmel driver. PRI1
- The last two drivers mentioned above are held up by firmware issues (see
- flamewar on LKML a few days ago). So maybe fixing those firmware issues should be a requirement for 2.6.X, because we can expect more wireless devices to need firmware upload at startup coming to market. (in progress?) PRI1
- rmk: SA11xx USB client/gadget code (David B has been doing some work on
- this, and keeps trying to prod me, but unfortunately I haven't had the time to look at his work, sorry David.) PRI3
- ext3 and ext2 block allocators have serious failure modes - interleaved
- allocations. PRI3
- Integrate Chris Mason's 2.4 reiserfs ordered data and data journaling
- patches. They make reiserfs a lot safer. Ordered: PRI2 data journalled: PRI3
- (Trond:) Yes: I'm still working on an atomic "open()", i.e. one
- where we short-circuit the usual VFS path_walk() + lookup() + permission() + create() + .... bullsh*t... I have several reasons for wanting to do this (all of them related to NFS of course, but much of the reasoning applies to *all* networked file systems).
- 1) The above sequence is simply not atomic on *any* networked
- do a 'permission' RPC call when the server is in *any* case going to tell you whether or not this operations is allowed. Why do a 'lookup()' when the 'create()' call can be made to tell you whether or not a file already exists).
- doesn't pass an 'EXCLUSIVE' flag down to the filesystems.
- requirements when compared to most other VFS operations.
intent' or (better yet) for a proper dentry->open() to be integrated with path_walk()/open_namei(). I'm still working on the latter (Peter has already completed the lookup with intent stuff).
(All this is in progress, see http://www.fys.uio.no/~trondmy/src) (Is awaiting Pater Braam's intent patches. Applicable to CIFS) PRI2 (?)
- viro: convert more filesystems to use lib/parser.c for options.
- aio: fs IO isn't async at present. suparna has restart patches, they're
- in -mm. Need to get Ben to review/comment. PRI1.
drepper: various filesystems use ->pid wrongly
- hch: devfs: there's a fundamental lookup vs devfsd race that's only
- fixable by introducing a lookup vs devfs deadlock. I can't see how this is fixable without getting rid of the current devfsd design. Mandrake seems to have a workaround for this so this is at least not triggered so easily, but that's not what I'd consider a fix.. PRI2
- rusty: Zippel's Reference count simplification. Tricky code, but cuts
- about 120 lines from module.c. Patch exists, needs stressing. PRI3
- rusty: Fix module-failed-init races by starting module "disabled". Patch
- exists, requires some subsystems (ie. add_partition) to explicitly say "make module live now". Without patch we are no worse off than 2.4 etc. PRI1
- Integrate userspace irq balancing daemon.
- kexec. Seems to work, was in -mm.
- rmk: lib/inflate.c must not use static variables (causes these to be
- referenced via GOTOFF relocations in PIC decompressor. We have a PIC decompressor to avoid having to hard code a per platform zImage link address into the makefiles.) PRI2
- klibc merge?
- dropbehind for large files
- Real serious use of IPSEC is hampered by lack of MPLS support. MPLS is a
- switching technology that works by switching based upon fixed length labels prepended to packets. Many people use this and IPSEC to implement VPNs over public networks, it is also used for things like traffic engineering. A good reference site is:
- Sometimes we generate IP fragments when it truly isn't necessary.
- The way IP fragmentation is specified, each fragment must be modulo 8 bytes in length. So suppose the device has an MTU that is not 0 modulo 8, ethernet even classifies in this way. 1500 == (8 * 187) + 4 Our IP fragmenting engine can fragment on packets that are sized within the last modulo 8 bytes of the MTU. This happens in obscure cases, but it does happen. I've proposed a fix to Alexey, whereby very late in the output path we check the packet, if we fragmented but the data length would fit into the MTU we unfragment the packet. This is low priority, because technically it creates suboptimal behavior rather than mis-operation. PRI1
- Lots of misc. cleanups, which are happening slowly.
- PM code in mainline is currently b0rked. Fixes in -mm
- Pat and Pavel disagree over swsusp. Need to sort that out.
- Frame buffer restore codepaths (that requires some deep PCI magic)
- XFree86 hooks
- AGP restoration
- DRI restoration
- (davej/Alan: not super-critical, can crash laptop on restore. davej looking into it.) PRI2
- IDE suspend/resume without races (Ben is looking at this a little)
- Pat: There are already CPU device structures; MTRRs should be a
- dynamically registered interface of CPUs, which implies there needs to be some other glue to know that there are MTRRs that need to be saved/restored. PRI1
- We need a kernel side API for reporting error events to userspace (could
- be async to 2.6 itself) (Prototype core based on netlink exists) PRI2
- Kai: Introduce a sane, easy and standard way to build external modules
- - make clean and make modules_install are both broken PRI2
- Alan: Cardbus/PCMCIA requires all Russell's stuff is merged to do
- multiheader right and so on PRI1
- Fix acpi for all newer IBM Thinkpads see
http://bugme.osdl.org/show_bug.cgi?id=1038 for more information
- alan: VIA APIC stuff is one bit of this, there are also some other
- reports that were caused by ACPI not setting level v edge trigger some times PRI1
- mochel: it seems the acpi irq routing code could use a serious rewrite.
- grover: The problem is the ACPI irq routing code is trying to piggyback on the existing MPS-specific data structures, and it's generally a hack. So yes mochel is right, but it is also purging MPS-ities from common code as well. I've done some preliminary work in this area and it doesn't seem to break anything (yet) but a rewrite in this area imho should not be rushed out the door. And, I think the above bugs can be fixed w/o the rewrite. PRI2
- mochel: ACPI suspend doesn't work. Important, not cricital. Pat is
- working it. PRI2
- Floppy is almost unusably buggy still
akpm: we need more people to test & report. alan: "Floppy has worked for me since the patches that went in 2.5.69-ac and I think -bk somewhere" PRI1
- IDE PIO has occasional unexplained PIO disk eating reports
- IDE has multiple zillions of races/hangs in 2.5 still
- IDE scsi needs rewriting
- IDE needs significant reworking to handle Simplex right
- IDE hotplug handling for 2.5 is completely broken still
- There are lots of other IDE bugs that wont go away until the taskfile
- stuff is included, the locking bugs that allow any user to hang the IDE layer in 2.5, and some other updates are forward ported. (esp. HPT372N). PRI1
- (Kai, rmk)
- isdn_tty locking is completely broken (cli() and friends)
- fix other drivers
- lots more cleanups, adaption to recent APIs etc
- fixup tty-based ISDN drivers which provide TIOCM* ioctls (see my recent
- 3-set patch for serial stuff) Alternatively, we could re-introduce the fallback to driver ioctl parsing for these if not enough drivers get updated. PRI3
- davej: Either Wireless network drivers or PCMCIA broke somewhen. A
- configuration that worked fine under 2.4 doesn't receive any packets. Need to look into this more to make sure I don't have any misconfiguration that just 'happened to work' under 2.4 PRI1
- jejb: qlogic -
- hch, Mike Anderson, Badari Pulavarty: scsi locking issues
- o there are lots of members of struct Scsi_Host/scsi_device/scsi_cmnd
- with very unclear locking, many of them probably want to become atomic_t's or bitmaps (for the 1bit bitfields).
- thought about.
- o there are lots of members of struct Scsi_Host/scsi_device/scsi_cmnd
- rmk: several OSS drivers for SA11xx-based hardware in need of
- ALSA-ification and L3 bus support code for these.
- rmk: linux/sound/drivers/mpu401/mpu401.c and
- linux/sound/drivers/virmidi.c complained about 'errno' at some time in the past, need to confirm whether this is still a problem.
rmk: need to complete ALSA-ification of the WaveArtist driver for both
- Also PC9800 merge needs finishing to the point we want for 2.6 (not all).
- davej: PAT support (for mtrr exhaustion w/ AGP)
- 2.5.x won't boot on some 440GX
- alan: Problem understood now, feasible fix in 2.4/2.4-ac. (440GX has two IRQ routers, we use the $PIR table with the PIIX, but the 440GX doesnt use the PIIX for its IRQ routing). Fall back to BIOS for 440GX works and Intel concurs. PRI1
- 2.5.x doesn't handle VIA APIC right yet.
- We must write the PCI_INTERRUPT_LINE
- We have quirk handlers that seem to trash it. PRI1
- ECC driver questions are not yet sorted (DaveJ is working on this) (Dan
- Hollis) alan: ECC - I have some test bits from Dan's stuff - they need no kernel core changes for most platforms. That means we can treat it as a random driver merge. PRI3
- alan: 2.4 has some fixes for tsc handling bugs. One where some bioses in
- SMM mode mess up our toggle on the time high/low or mangle the counter and one where a few chips need religious use of _p for timer access and we don't do that. This is forward porting little bits of fixup. ACPI HZ stuff we can't trap - a lot of ACPI is implemented as outb's triggering SMM traps PRI1
- time handling is broken. Need to move up 2.4 time.c code.
- NMI watchdog seems to tick too fast
- need to coredump 64bit vsyscall code with dwarf2
- Consider merging of Erich Focht's very clean and simple homenode NUMA
- scheduler (I have my own in 2.4, but Erich's 2.5 version is much cleaner) PRI2
- Consider port of the Simple NUMA API from 2.4/homenode.
- move 64bit signal trampolines into vsyscall code and add dwarf2 for it.
- (in progress) PRI1
- describe kernel assembly with dwarf2 annotations for kgdb
- rth: Ptrace writes are broken. This means we can't (reliably) set
- breakpoints or modify variables from gdb. PRI1
- rmk: missing raw keyboard translation tables for all ARM machines.
- Haven't even looked into this at all. This could be messy since there isn't an ARM architecture standard. I'm presently hoping that it won't be an issue. If it does, I guess we'll see drivers/char/keyboard.c explode. PRI2
- SH needs resyncing, as do some other ports. SH64 needs merging.
- No impact on mainstream platforms hopefully. PRI2
- A nastly memory management problem causes random crashes. These appear
- to be fixed/hidden by the objrmap patch, more investigation is needed. PRI1
- Early userspace and 64 bit dev_t will allow the removal of most of
- dasd_devmap.c and dasd_genhd.c. PRI2
- The 3270 console driver needs to be replaced with a working one
- (prototype is there, needs to be finished). PRI2
- Minor interface changes are pending in cio/ when the z990 machines are
- out. PRI2
- Jan Glauber is working on a fix for the timer issues related to running
- on virtualized CPUs (wall-clock vs. cpu time). PRI1
- a block device driver for ramdisks shared among virtual machines
- driver for crypto hardware
- 'claw' network device driver